Transfocator - a device for the precise positioning of x-ray optical elements. The device is intended for instrumental focusing and control of the parameters of the x-ray flux in the synchrotron radiation channels, laboratory analytical and measuring systems of non-destructive measurements of complex structures and objects
* dimensions and weight of the device will change.
The device is designed to generate neutrons and to remove heat from a beryllium target as part of a neutron source..
The special design of the target makes it possible to remove a large amount of heat from the beryllium target under the proton beam exposure. The system is a drum on which beryllium segments are installed. The constant rotation of the drum makes it possible to alternately irradiate all segments of the target. This makes it possible to reduce the thermal load per unit area of the target.
Fluorescent cell for spectral diagnostics of materials in the in-situ mode in the liquid phase at elevated temperatures and pressures on synchrotron radiation sources.
Cell designed for highly absorbing media or samples with a low concentration of metal species in the catalytic system that require fluorescence regime of acquisition
The transmission cell for spectral diagnostics of materials in the in-situ mode in the liquid phase at elevated temperatures and pressures on synchrotron radiation sources.
Cell was designed to perform XAS experiments in the transmission mode improving the spectra obtained at high energies of an incident X-ray beam or for solutions with low atomic number of the atoms in a solvent (water, organic solvents).
The best solution for high-intensive X-ray beams
Already tested at XFEL
https://doi.org/10.1107/S1600577517015016 +lowest-Z electrode material
+ metallic
+ small resistivity,
= thus very fast time constant τ=RC
Impressum: Königssystems UG (haftungsbeschränkt), Borgfelde 6, 22869, Schenefeld, Germany
Trade Register: Pinneberg HRB17076PI
CEO: Aleksandr Goikhman
VAT: DE319347442